C-TEC CA730 CAST Addressable I/O Module
Request a quote for pricing and availability. Installation, commissioning and compatibility checks with your existing system are also available.
Technical documentation
PDFInstallation ManualCA730 CAST Input/Output Unit Installation Instructions
EnglishPDFCertification
CAST CA730 Input/Output Module EU Certificate of Conformity
EnglishPDFCertification
CAST Input/Output Units EU Declaration of Conformity
English
The manufacturer has not published Turkish documentation for this product; please contact us for technical support in Turkish.
Product description
CA730 combines monitored inputs and a relay output in a single module for C-TEC CAST addressable fire alarm systems. It can monitor conventional detector and call point zones or switch inputs; its relay can be used to activate roller shutters, door locks, gas shut-off valves and smoke ventilation systems. It features an integral short-circuit isolator and status indicators.
Key features
- Switch monitoring, zone monitoring and output unit functions
- Supports up to 20 conventional detectors and 10 manual call points
- 1 A / 30 V DC volt-free changeover relay
- Integral short-circuit loop isolator
- 22–40 V DC operating voltage
- LPCB, Kiwa, DBI, BOSEC and SBSC approvals
Technical specifications
| Compatibility | C-TEC XFP/ZFP CAST addressable fire panels |
|---|---|
| Operating voltage | 22–40 V DC |
| Standby current | Typical 1,3 mA |
| Alarm current | Typical 5,5 mA at 22–40 V DC |
| Relay | 1 volt-free single-pole changeover contact; 1 A / 30 V DC |
| Input | 1 monitored input; configurable for zone monitoring or as a monitored normally open switch |
| Dimensions | 147 × 87 × 22 mm |
| Protection rating | IP40 |
| Operating temperature | −10 °C to +55 °C |
| Weight | 122 g |
Information has been compiled from manufacturer/distributor sources. Please consult the documentation for current technical specifications.
Other C-TEC Products
Request a site survey and quote for your project
Tell us about your building, existing system and requirements; together, we can determine the right solution.