Honeywell · Contact and Monitoring Modules

Honeywell Esser 808619.10 esserbus FSA Fire Door Transponder

Brand: Honeywell
Model: 808619.10
Product type: Honeywell Fire Alarm Module
Category: Contact and Monitoring Modules
System Type: Addressable

Request a Quote Ask on WhatsApp 0212 424 07 24

Request a quote for pricing and availability. Installation, commissioning and compatibility checks with your existing system are also available.

Product description

The esserbus FSA transponder supports the operation of fire door hold-open systems via esserbus or in standalone mode. System status can be displayed on the fire alarm control panel; an external power supply is required and can be monitored.

Key features

9200 series detectors and the specified IQ8Quad detectors can be used as FSA detectors.
FSA detectors can be programmed as devices on the loop; the status of the fire door hold-open system is transmitted to the panel.
Standalone operation and activation of the hold-open device by automatic detectors are possible.
Only one loop address is required per transponder.
A maximum of 100 transponders can be used per panel and 32 per analogue loop.
A maximum of 127 detector zones are supported on each analogue loop.

Technical specifications

Operating voltage	10 ... 28 V DC
Standby current @ 12 V DC	Approx. 6 mA (from external supply)
Current consumption	Max. 28 mA (from external supply)
Relay contact load	Max. 30 V DC/1 A or 48 V DC/0,5 A
Operating temperature	-5 °C ... 50 °C
Storage temperature	-25 °C ... 75 °C
Relative humidity	< %95 (non-condensing)
Protection rating	IP 40 (enclosure)
Weight	Approx. 70 g
Dimensions	W: 72 mm, H: 65 mm, D: 20 mm (printed circuit board)